Ola-la! Strymon stays versatile with new chorus

Techies at California-based shop cram processor full of warble

We knew the minute we walked into the private test drive suite Strymon set up at this year’s Winter NAMM show that we were in for a treat. The company – a semi-unknown having only offered one pedal (the OB.1 compressor) at the time – had four new offerings to show to prospective dealers. The sweet sounds and extreme versatility of the Strymon digital stomps was enough to put a smile on the face of even the most steadfast analog snob. While hype for the Brigadier delay and blueSky reverb ran fairly rampant after their release, there was less buzz about the Ola chorus/vibrato. We took that as a hint that we need to investigate the pedal further.

The Ola comes in the double-wide standard white pedal box with a logo sticker affixed to the lid. Inside the box you will find the Ola pedal, a power supply for the stomp and four rubber foot pads to outfit the stomp with should you choose. In an effort to save a tree or two, instructions for the Strymon stomps are available online in pdf form at the pedalmaker’s website. Like other Strymons, the Ola utilizes the company’s dBucket technology. The pedal’s DSP is entirely dedicated to and focused on providing the most lush and organic chorus and vibrato sounds available, according to the builder.

The pedal itself looks very similar to the all the other Strymon stomps. It sports five knob controls – Speed, Mix, Ramp/Env, Tone and Depth. Two toggle switches allow the user to shift between three effects types – Chorus, Multi and Vibrato… and three modes – Norm, Env and Ramp. The Ola also has two footswitches – one functioning as the On/Off bypass while the other allows the user to store a favorite setting for quick recall.

The Speed knob adjusts the chorus LFO speed, while Depth dials in the chorus LFO depth. Mix adjusts the wet/dry signal blend. Tone adjusts treble frequencies of the wet signal with treble boost at max, treble cut at min and flat at noon. Ramp/Env is a little more involved. In Ramp mode, the knob adjusts the rate of the ramping effect. The effect will ramp more quickly as you turn the knob right. In Env mode, the knob adjusts the sensitivity to your playing. The effect will react more strongly as you turn the knob right. The Type toggle lets you choose between a traditional single-delay line chorus, a studio three-phase multi delay line and a vintage vibrato. The Mode toggle switches from normal off/on operation, envelope-controlled operation and ramp operation, where the effect ramps in while the Bypass footswitch is held down. The Favorite footswitch can store a favorite setting. When the Favorite setting is engaged, the LED will indicate the ‘saved’ setting for each knob as it is turned. Push and hold the footswitch to save a new favorite.

The back of the Ola sports high impedance stereo inputs (Left In, Right In) as will as stereo outputs (Left Out, Right Out) where the Left Out is used for mono signal output. The back panel also has the 9v DC center negative power input.

So let’s dive in, shall we. First with the Strat, neck pick-up, we dial in a bit of choral shimmer. With the Type toggle on Chorus, the Mode toggle on Norm, Speed knob at 9 o’clock, Mix and Ramp/Env at noon, Tone at 3 o’clock and Depth at noon, here is a riff from a long list of incomplete original tunes. First dry, then wet.

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

The Ola gives a nice, bright waver to that chordal riff, adding a bit of body to an otherwise simple strum. Shifting down to the bridge pick-up, we demonstrate the Ramp effect of the Ola. The Ramp allows the user to introduce the effect into the dry sound over time… either slowly or quickly depending on the Ramp knob setting. With the Type toggle on Multi, the Mode toggle on Ramp, Speed knob at 3 o’clock, Mix at 3 o’clock, Ramp/Env, Tone and Depth at noon, listen after the effect is engaged for the steady build up of chorus in the riff.

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

Over to the Les Paul, we give the Ola’s vibrato voicing a try. With the Type toggle on Vibrato, the Mode toggle on Norm, Speed knob at 8 o’clock, Mix, Ramp/Env, Tone at noon and Depth at 4 o’clock, here is a riff written by a friend almost 20 years ago. First clean, then the plunge!

Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.

The Strymon Ola is another great pedal from this up and coming company. Fairly compact and uber-versatile, with many more sounds tucked away than we could ever get to in this review, the Ola is a worthy addition to Strymon’s line of dBucket offerings. At $300, the price might scare casual buyers away, but for the pedal board real estate conscious wanting a smooth, chorus/vibrato combo stomp that can deliver a multitude of shimmer and shine with a few knob and/or toggle tweaks, the Ola is well worth consideration. That’s our opinion anyway… your mileage may vary.

PLEASE NOTE: All YMMV Review clips are played through a Fender ’65 Princeton Reverb RI using Lava Clear Connect cables. No reverb or other effects were added to the clips. Guitars used in this review include a 1979 Gibson Les Paul Custom and a 1998 Fender American Deluxe Stratocaster.